Properties SKU: RYC086069
|Windshield Body Length||260 mm|
|Total Windshield Length||370 mm (includes the End Caps)|
|Height||Windshield: 100 mm|
|Windjammer Fur Length||40 mm|
|Windjammer Fur Colour||Grey|
|Max Wind-noise Attenuation||50 dB|
Rycote Modular Windshield WS 3 Kit (XLR-5F)
The Rycote Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.
This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.
Rycote suspensions provide complete isolation against handling noise and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs.
The Windshield basket completely surrounds the microphone and its connector, sliding onto the Modular Suspension to provide up to 30dB of wind noise attenuation. This is the first layer of windshielding protection for your microphone.
The Windjammer introduced by Rycote in 1985, is high quality synthetic fur covers, designed to fit perfectly over the Modular Windshield. It gives an additional 20dB of wind noise attenuation. Fitted with a drawstring & toggle to allow snug and easy fitting. Modular Windshield Kits, including zipped Windjammer are also available on request.
Modular Windshield 3 Kit is suitable for stereo microphones from 161mm up to 210mm in length and 19-34mm diameter with a 5 Pin XLR connector
Flexible, complete windshield and suspension package, which provides varying levels of windshielding for numerous microphone configurations
The iconic Windshield Kit is the industry standard, and leads the way in windshielding and suspension technology
1 x XLR Holder MK II (Product Code: 048493) The XLR Holder Mk II fits between any 3/8" male threaded boom pole or mic stand and any 3/8" female microphone shock-mount or windshield system.
1 x Boom Poles Adaptor (Product Code: 048402).
1 x Pistol Grip Handle with Lever (Product Code: 048401).
1 x Connbox CB4 (XLR-5F) (Product Code: 016925) Suitable for single shank stereo microphones with 5-pin XLR.
1 x Windjammer WJ 3 (Product Code: 021503) Suitable for use with the Windshield 3.
1 x Windshield WS 3 (Product Code: 010603) Suitable for mic lengths 161-210mm.
1 x Suspension Medium (XLR-5F) 68 Duo (Product Code: 040145) Suitable for stereo mics in a WS3 or WS4.
20x Duo-Lyre 68 (19/34).
Hex head key.
Finding the correct Windshield Kit will depend on the type, length and diameter of the microphone.
Because the whole microphone is encased in a windshield basket the total length of the microphone including the XLR cable must be accounted for, this means adding 50mm to the length of the mic.
For a windshield to work effectively the microphone should be mounted centrally within the windshield, therefore the microphone + XLR length should approximately equal the windshield body length. The body length of our windshields is the total length, excluding end caps.